![\"??????????????\"](\"http:\/\/www.cprss.org\/wp-content\/uploads\/2016\/06\/HowardDoingTarpTrialFit_20160621_105127.jpg\")
<\/a>Howard doing a trial fit of a tarp on the canopy frame.\u00a0 It was long enough but not wide enough.\u00a0 Two wider tarps have been bought – one for each of the two canopy pole sets.<\/p><\/div>\n
<\/a>Howard cutting grass by the switch tower.<\/p><\/div>\n
<\/a>Jim, Howard, and Larry discussing Loco 1932’s status.<\/p><\/div>\n
<\/a>Larry and Ken by Loco 615.\u00a0 They were requested to smile.<\/p><\/div>\n
<\/a>615’s shell with new lettering – still a work in progress – larger lettering is needed but this will be ARF\u00a0 (After Rail Festival).\u00a0 The old lettering peeled right off.<\/p><\/div>\n
<\/a>Switch pad at the East tunnel end.\u00a0 Bob S\u00a0 raised the low corner and has improved the ballast under the approach track.<\/p><\/div>\n
<\/a>615’s old bell switch.\u00a0 It was operating intermittently so John L replaced it.\u00a0 The old switch fell apart during removal – a smoking gun – we’ll see.<\/p><\/div>\n
<\/a>Bob S\u00a0 continuing to level the track.\u00a0 Bob worked most of the long, hot work day leveling track.<\/p><\/div>\n
<\/a>Don B\u00a0 painting the upper parts of the Yoder Engine House (YEH).<\/p><\/div>\n
<\/a>Howard and Jim H\u00a0 putting tape on the canopy joints and poles to help future assemblers.\u00a0 There are two 10 X 20 foot canopy pole sets but they have different roof slopes and can’t be mixed.\u00a0 There is a red set and a yellow set – don’t mix them.\u00a0 Also, the black taped poles slide into the black taped joint ends.<\/p><\/div>\n","protected":false},"excerpt":{"rendered":"
The pictures below were taken during the work day on June 21, 2016.\u00a0 It was a hot and fairly humid day with a slight breeze which helped make it bearable.\u00a0 Several projects were in work simultaneously around the track and … Continue reading